$299.00
JTC Pro is an advanced pedal with simplified controls. It’s a dual switch stomp box pedal with 6 hours of recording capability and 256 loop track memories. And the audio...

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

Sku: NXNDL5
Vendor: NU-X

JTC Pro is an advanced pedal with simplified controls. It’s a dual switch stomp box pedal with 6 hours of recording capability and 256 loop track memories. And the audio recording quality is 24-bit and 44.1 kHz sample rate.

Features:

  • 24-bit audio recording quality
  • Up to 6 hours recording time
  • 256 memory slots
  • Drum rhythms in 4/4 and 3/4
  • Drum fills
  • Tap Tempo
  • 2 start modes
  • 3 stop modes
  • One Shot player
  • 2 Loop switch actions: Record-Play and Record-Overdub
  • Optional drum sound enhancement
  • 2 Outputs, Right Output speaker emulated (optional)
  • 3 Output routings: Guitar to L and Drums to R, Guitar and Drums to R/L, Guitar and Drums to R and Drums to L
  • External footswitch input to switch between loop phrases. (NMP-2 sold separately)
  • Micro-B USB input
  • 9 V negative tip power input

Dual-Switch Action
Loop and the drum controls are separated, left footswitch (LOOP) controls recording and overdubs, and start/stop plays the recorded loop tracks. It’s also TAP Tempo control, you can set the drum speed by tapping the left footswitch before you record a track.

Looper Action
There are 2 different loop recording actions on JTC Pro; Record and Play (RP), and Record and Overdub (RD). 


High Quality Drum Sound - Smart Drum Fills
Right footswitch (RHYTHM) controls the drum and it adds a drum fill during the performance. Drum fills length is one measure (depends on 4/4 or 3/4 rhythms). When you hit the RHYTHM button, drum fill will start immediately and it will play until the end of the current bar. For example if you push the switch at 3rd beat -> drums fill length will be 2 beats only.

There are 40 drum patterns and fills including Pop, Rock, Blues, Metal and more other styles with 3/4 and 4/4 beats.
 

Start/Stop Modes
It has very useful and stop modes for making your jam sounds like an arranged song during the performance. There are 2 Start Modes and 3 Stop Modes;

Start Modes

Press and hold the Stop Modes button, and select a start mode; (Ar) Auto-Recording, (Nr) Normal Recording

Normal Recording - Classic hit and play looper action. JTC Pro will start recording when you push the loop switch.
Auto-Recording - In this mode, when you push the loop switch, the JTC Pro will be standing by for recording. And it will start recording immediately when you hit the guitar strings. 


Stop Modes
After you record a track, you can simply push the Stop Modes button, and choose one of the modes to finish your performance the way you like.

Normal Stop - Double hit to Loop switch and the looping track will stop immediately.
Fine Stop - Double hit: The track will play until the end then it will stop, don't forget to hit finishing chord after it stop.
Fade Out - The track volume will be decreased to 0 slowly in 10 seconds then it will stop.

ONE-SHOT Mode

And, One Shot mode is very useful for playing any loaded backing track without looping. You can load any song to play along, the supported file type is 24-bit 44.1 kHz Stereo Wave (.wav)

You can download NUX Audio File Converter to change the audio file format and make it compatible for JTC Pro. (It doesn't process the audio signal, it changes the file ID and JTC Pro can recognize the file to play. Main file must be wav or mp3 format, please check the support page for converter guide)

Advanced Output Options and Frequency Optimization (FR ON/OFF)
JTC Pro has 2 outputs and there are several output modes; a stereo connection to two amplifiers, or you can activate the speaker cabinet simulation for Right Output to send your guitar signal directly to a PA system or PA speaker.

When you connect to any guitar amplifier or PA system you will hear a full range and dynamic drums, still, if you are using a small practice amplifier there is an optional drum frequency optimization. It makes the drum sounds more clear and helps you to get a real looper experience with the smaller amplifiers.

You will find a guide about Output routing and Frequency Optimization on the support page.

External Footswitch Input

You can connect NUX NMP-2 control footswitch (sold separately) or any equal pedal to scroll between the stored tracks. During the play; if you switch the selected track to another, JTC Pro will play the whole track, then it jumps to selected one. Depending on the track length you can move between a couple and/or several tracks easily.

Load Your Favorite Songs and Backingtracks
You can load your favorite songs and/or backingtracks into JTC Pro to play along.

Supported file type: 24-bit / 44.1kHz Stereo WAVE (.wav)
If JTC Pro can not play the song you added, you can simply use NUX Audio Converter software you can find on the support section for Windows and MAC computers.

How to convert an audio file?

(Software does not process the audio file, and does not affect the audio quality, it just fixes the file ID so JTC Pro can recognize it)

FREE SHIPPING TERMS
  • Total order must be a value of $200 or more.
  • Excludes Delivery to a PO Box
  • Order must be under 25kg and 25 cubic in size
  • Free Delivery only to metro areas of NSW Sydney Metro, Western suburbs, Penrith, Windsor, Campbelltown, Camden (only).
  • Our deliveries are from various couriers or Australia post and can take from 3 to 10 business days, depending on if instock or stock availability on items.
  • Orders Up to 120kg Free Delivery within 15km of a Sieff’s Music Store.

OTHER SHIPPING TERMS
  • Larger items above 120kg are excluded from this term and delivery will be quoted upon sale agreement.
  • Regional and other states will incur standard postage/courier charges.
  • Free shipping is only available in NSW and is not available to regional remote areas, or WA, NT, SA, ACT, VIC, TAS and QLD. Quoted shipping on checkout or contact us online/email or one of our stores to work out an accurate shipping method to your location.
  • Full shipping costs must be paid, if full shipping cost is not paid customers will be contacted and orders will be changed or cancelled to meet the right postage costs to your place of residence or business.
  • Orders may require someone to be on site to accept delivery, or a card may be left, and will need to be picked up from the closest pickup location. In this circumstance you will require ID to collect your parcel.
  • We use various courier services and Australia post, we do not deliver to PO Boxes.
  • International shipping is available under certain circumstances and must contact us via email.

PARCEL TRACKING
  • Parcels with tracking information can be obtained by emailing us at info@sieffsmusic.com.au
  • Not all parcels will have tracking information.

    RETURNS AND WARRANTY POLICY
    • We do not offer returns for change of mind purchases.
    • Warranties are covered by manufacturers
    • If an item is damage during transport delivery, it is preferred you do not accept the package, please contact us if you have any concerns.
    • Any other shipping related issues please contact our email info@sieffsmusic.com.au or one of our stores during business hours.